The Shadowlands are open and Season One has begun. Face deadly foes, earn new rewards and achievements, and raid Castle Nathria, Sire Denathrius' fortress in the dark heart of Revendreth. Mac OS 9.2.2 for PowerMac G4 MDD – Retail Mac OS 9 installers do not work on the last generation PowerMac G4 MDD models. This is a copy of Mac OS 9.2.2 included on the MDD bundled Software Restore CDs which is able to boot these G4 models into OS 9 (FireWire 400 models only). It can also be used as Classic Mode on any PowerMac running Mac OS. Lipstick: the iconic product that made MAC famous. Shade, define, and accentuate the lips with hundreds of hues in high-fashion textures. Ea games for mac From high fantasy to competitive sports – you can tap into the excitement of EA's hottest Mac games! Unleash your imagination in The Sims 4, rise to power and fight epic battles in Dragon Age II, build a living world where every choice matters in SimCity, and more.

1. Kaotic Mac Os Download
2. Kaotic Mac Os Catalina

Can this small ball of foam really take the room out of the equation when recording vocals?

Kaotica's Eyeball is a different take on the 'virtual vocal booth' concept, and is designed to keep unwanted off-axis sound out of the microphone so as to facilitate cleaner recordings in rooms or spaces with inadequate acoustic treatment. It's also designed to channel more of the vocal sound energy into the microphone than with the mic set up in free space, so you actually get a slight apparent increase in microphone sensitivity. This latter characteristic might sound like a recipe for unwanted sound coloration, but the designers have made a lot of measurements and produced a wealth of technical evidence that appears to support their claim that the sound remains accurate; their test results suggest that the Eyeball doesn't affect the mic's frequency response by more than ±1.4dB right up to 30kHz.

The key questions, though, are how it performs and how easy it is to use. On the face of it, the Eyeball looks like a large foam windsock, with a horizontal cavity bored into it around 4.5 inches in diameter. Another hole in the base allows a side-address mic to be poked in from below, and in many cases the Eyeball can simply sit on top of an existing shockmount. A custom-made pop shield with blue nylon mesh, pushed into the front of the cavity, completes the assembly. The foam is fairly dense, and this makes the structure feel quite secure. Note that while most side-address mics will fit (up to 2.75 inches in diameter), the foam won't stretch far enough to accommodate extra-wide-bodied mics. There are many advantages to this format (assuming it actually works as described — which I'll get to!) and despite what seems to be a high cost for a seemingly simple foam gizmo, it's no more expensive than many of the curved 'behind the mic' screens on the market.

It's clear that the light weight of the Eyeball is not going to cause the mic stand to overbalance (which some screens can) and its small physical size also facilitates better eye contact with the engineer. Another criticism of conventional screens is that they make it difficult for vocalists to put their lyric sheets where they can see them easily without compromising their singingposture. Again, that's not a problem here. So, it all comes down to how well it works as a screen and whether or not it allows the true character of the mic to be maintained.

I made my test recordings using the new Rode NT1 microphone (cardioid) set up in my control room, firstly in free air with no pop shield, then inside the Eyeball with the pop shield fitted. As the Eyeball design claims a channelling effect on the incoming sound, I also took care to set the pop shield at precisely mouth level, speaking around six inches away from it, though singers may find that they want to work a little closer. As the documentation suggests, there seemed to be a decibel or two more level with the Eyeball fitted, and I also felt as though the lower-mids had come up in level a fraction. However, any tonal change (other than the wanted attenuation of room reflections) is very subtle; to put this in more practical terms, I've heard just as great or greater changes when placing a conventional curved screen behind a mic. I also tried recording with and without the pop shield to see if that had any subjective effect on the sound, but there was nothing I could detect on general speech.

My tests confirmed that the foam surrounding the mic provides a worthwhile screening effect, attenuating off-axis sounds and room reflections to a significant degree. In this respect the results are certainly no less effective than when using a conventional screen, and with the Eyeball there's actually more screen coverage at the sides of the mic (as well as above and below) where cardioid models are still very sensitive. Another design plus point is that having a snug-fitting pop shield like this means there's no path that allows air blasts to leak around the edge of the screen.

To achieve the best results, the singer needs to work close to the pop shield and to sing directly into it, rather than above or below it, but if you do that the Eyeball actually works very well. I'd still recommend putting an absorber behind the singer to intercept reflections from that wall, especially if it is close by, but as always a cheap polyester duvet works fine for that purpose. This simple strategy means the sound can be dried up nicely even when working in very reflective spaces. Applications for smaller studios that have no dedicated vocal booth are obvious but the Eyeball is also well suited to straight voice-over work or podcast production, particularly given that it still allows a clear line of sight to your cheat sheet!

£189 including VAT.

NOTE:

Between mid October 2019 and mid February 2020 everyone in the Army was migrated to use their PIV Authentication certificate for Email access. You no longer use the Email certificate for Enterprise Email or any CAC enabled websites

Mac users who choose to upgrade (or already have upgraded) to Mac OS Catalina (10.15.x) or Big Sur (11.xx.x) will need to uninstall all 3rd Party CAC enablers per https://militarycac.com/macuninstall.htm AND reenable the native smart card ability (very bottom of macuninstall link above)

If you purchased your Mac with OS Catalina (10.15.x) or Big Sur (11.xx.x) already installed, you can skip the uninstall part above and follow the instructions below.

6 'high level' steps needed, follow down the page to make this a painless systematic process

Kaotic Mac Os Download

Step 1: Is your CAC reader Mac friendly?

Visit the USB Readers page to verify the CAC reader you have is Mac friendly.

Visit the USB-C Readers page to verify the CAC reader you have is Mac friendly.

'Some, not all' CAC readers may need to have a driver installed to make it work.

NOTE: Readers such as: SCR-331 & SCR-3500A may need a firmware update (NO OTHER Readers need firmware updates).

Information about these specific readers are in Step 2

Step 2: Can your Mac 'see' the reader?

Plug the CAC reader into an open USB port before proceeding, give it a few moments to install

Step 2a: Click the Apple Icon in the upper left corner of the desktop, select 'About This Mac'

Step 2b: Click 'System Report...' (button)

Step 2c: Verify the CAC reader shows in Hardware, USB, under USB Device Tree. Different readers will show differently, most readers have no problem in this step. See Step 2c1 for specific reader issues.

Step 2c1: Verify firmware version on your SCR-331, SCR-3310 v2.0, GSR-202, 202V, 203, or SCR-3500a reader. If you have a reader other than these 6, Proceed directly to step 3

Step 2c1a-SCR-331 reader

If your reader does not look like this, go to the next step.

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for “SCRx31 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 5.25, you need to update your firmware to 5.25. If you are already at 5.25, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1b-SCR-3310 v2.0 reader

If your reader does not look like this, go to the next step.

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for “SCR3310 v2.0 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 6.02, it will not read the 'G+D FIPS 201 SCE 7.0' CAC on Mac OS 11.xx.x or 10.15.7. I contacted HID (the company that makes these readers) on 14 DEC 2020 to find a way to update the firmware to 6.02. They said there is not firmware update for the reader. If your reader is older, you may need a new one. Please look at: https://militarycac.com/usbreaders.htm to find a compatible one. If you are already at version 6.02, your reader should work fine on your Mac and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1c-SCR-3500A reader

If you have the SCR3500A P/N:905430-1 CAC reader,you may need to install this driver, as the one that installs automatically will not work on most Macs. Hold the control key [on your keyboard] when clicking the .pkg file [with your mouse], select [the word] Open

Step 3: Verify which version of MacOS you have?

(You need to know this information for step 6)

Step 3a: Click the Apple Icon in the upper left corner of your desktop and select 'About This Mac'

Step 3b: Look below Mac OS X for: Example: Version 10.X.X, or 11.X

Step 4: Figure out which CAC (ID Card) you have

(You need to know this information for step 6)

Look at the top back of your ID card for these card types. If you have any version other than the seven shown below, you need to visit an ID card office and have it replaced. All CACs [other than these six] were supposed to be replaced prior to 1 October 2012.

Find out how to flip card over video

Step 5: Install the DoD certificates (for Safari and Chrome Users)

Go to Keychain Access

Click: Go (top of screen), Utilities, double click Keychain Access.app

(You can also type: keychain access using Spotlight (this is my preferred method))

Select login (under Keychains),and All Items (under Category).

Download the 5 files via links below (you may need to <ctrl> click, select Download Linked File As... on each link) Save to your downloads folder

Please know... IF You have any DoD certificates already located in your keychain access, you will need to delete them prior to running the AllCerts.p7b file below.

https://militarycac.com/maccerts/AllCerts.p7b,

https://militarycac.com/maccerts/RootCert2.cer,

https://militarycac.com/maccerts/RootCert3.cer,

https://militarycac.com/maccerts/RootCert4.cer, and

Double click each of the files to install certificates into the login section of keychain

Select the Kind column, verify the arrow is pointing up, scroll down to certificate, look for all of the following certificates:

DOD EMAIL CA-33 through DOD EMAIL CA-34,

DOD EMAIL CA-39 through DOD EMAIL CA-44,

DOD EMAIL CA-49 through DOD EMAIL CA-52,

DOD EMAIL CA-59,

DOD ID CA-33 through DOD ID CA-34,

DOD ID CA-39 through DOD ID CA-44,

DOD ID CA-49 through DOD ID CA-52,

DOD ID CA-59

DOD ID SW CA-35 through DOD ID SW CA-38,

DOD ID SW CA-45 through DOD ID SW CA-48,

DoD Root CA 2 through DoD Root CA 5,

DOD SW CA-53 through DOD SW CA-58, and

DOD SW CA-60 through DOD SW CA-61

NOTE: If you are missing any of the above certificates, you have 2 choices,

1. Delete all of them, and re-run the 5 files above, or

2. Download the allcerts.zip file and install each of the certificates you are missing individually.

Errors:

Error 100001 Solution

Error 100013 Solution

You may notice some of the certificates will have a red circle with a white X . This means your computer does not trust those certificates

You need to manually trust the DoD Root CA 2, 3, 4, & 5 certificates

Double click each of the DoD Root CA certificates, select the triangle next to Trust, in the When using this certificate: select Always Trust, repeat until all 4 do not have the red circle with a white X.

You may be prompted to enter computer password when you close the window

Once you select Always Trust, your icon will have a light blue circle with a white + on it.

The 'bad certs' that have caused problems for Windows users may show up in the keychain access section on some Macs. These need to be deleted / moved to trash.

The DoD Root CA 2 & 3 you are removing has a light blue frame, leave the yellow frame version. The icons may or may not have a red circle with the white x

If you have tried accessing CAC enabled sites prior to following these instructions, please go through this page before proceeding

Clearing the keychain (opens a new page)

Please come back to this page to continue installation instructions.

Step 5a: DoD certificate installation instructions for Firefox users

NOTE: Firefox will not work on Catalina (10.15.x), or last 4 versions of Mac OS if using the native Apple smartcard ability

Download AllCerts.zip, [remember where you save it].

double click the allcerts.zip file (it'll automatically extract into a new folder)

Option 1 to install the certificates (semi automated):

From inside the AllCerts extracted folder, select all of the certificates

<control> click (or Right click) the selected certificates, select Open With, Other...

In the Enable (selection box), change to All Applications

Select Firefox, then Open

You will see several dozen browser tabs open up, let it open as many as it wants..

You will eventually start seeing either of the 2 messages shown next

If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

or

'Alert This certificate is already installed as a certificate authority.' Click OK

Once you've added all of the certificates...
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Option 2 to install the certificates (very tedious manual):

Click Firefox (word) (upper left of your screen)

Preferences

Advanced (tab on left side of screen)

Certificates (tab)

View Certificates (button)

Authorities (tab)

Import (button)

Browse to the DoD certificates (AllCerts) extracted folder you downloaded and extracted above.

Note: You have to do this step for every single certificate

Note2: If the certificate is already in Firefox, a window will pop up stating: 'Alert This certificate is already installed as a certificate authority (CA).' Click OK

Note3: If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

Once you've added all of the certificates...
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Step 6: Decide which CAC enabler you can / want to use

Only for Mac El Capitan (10.11.x or older)

After installing the CAC enabler, restart the computer and go to a CAC enabled website

NOTE: Mac OS Sierra (10.12.x), High Sierra (10.13.x), Mojave (10.14.x), Catalina (10.15.x), and Big Sur (11.1) computers no longer need a CAC Enabler.

Kaotic Mac Os Catalina

Try to access the CAC enabled site you need to access now

Mac support provided by: Michael Danberry